RightSmart 1200
Intellisite Field Communication Devices
Overview
The RightSmart 1200 device enable the data collection and communication processes..
Best Path Communication
We provide Best Path Communication solutions. Our communication solutions include a variety of satellite communication options for difficult terrain areas, cellular communication, landline options, and IP addresses. Our Professional Services Group can work with you to identify the Best Path Communication solution that works best for your specific needs and requirements.
RightSmart Kit 1200
RightSmart is a PCB with processor, communications interface, and firmware application that runs a protocol manager that converts field measurement equipment data into a standard file format. The device stores, encrypts and compresses data for cost-efficient transmission. Thresholds can be set to send alarms when parameters are out of range. The compact design allows for installation within most enclosures. To view a rotating view of the RS1200, click on the following link: http://help.intellisitesuite.com/RS1200Config/
Specifications
PHYSICAL
Size: 5.75” L x 3.5” W x 2.5” H (14.6cm L x 8.9 cm W x 6.4cm H)
ENVIRONMENTAL
Operating Temperature: -40°C to +60°C (-40° to +140° F)
Storage Temperature: -40°C to +60°C (-40° to +140° F)
Operating Humidity: 0 to 95% non-condensing
Optional LCD 4 x 20 characters; temperature compensated
ELECTRICAL
Solar Charger Input: 14VDC to 30VDC
Battery Input: 10VDC to 16VDC
POWER CONSUMPTION (TYPICAL @ 12VDC)
Transmit mode: 7.2 W
Receive Only: 0.78 W
Idle: 96 mW
In Circuit Transient Protection
SATELLITE COMMUNICATIONS (Iridium Satellite Network)
Frequency Range: 1616.0 to 1626.5 MHz
Duplexing Method: TDD (Time Domain Duplex)
Multiplexing Method: TDMA/FDMA
Mobile Originated and Mobile Terminated Messaging
CERTIFICATIONS / COMPLIANCE
Satellite: Iridium Network Approved
CSA: Class I, Div. 2, Groups C, and D
EXTERNAL INTERFACES
Serial:
Qty (1) RS232 or RS485 (Software Selectable) external equipment port
Qty (1) RS232 Maintenance Port
I/O:
Qty (4) Digital inputs (Contact Closure or Pulse Accumulation)
Qty (1) Digital Open Collector, 15Vdc @ 100 ma Max
Qty (4) Analog Input, 0-5V or 4 ma to 20 ma (with external 250 Ohm resistors).
INTERNAL INPUTS
Battery Voltage, Charger Voltage, Ambient Temperature
PROGRAMMING CAPABILITIES
Remotely Programmable or Via Local Utilities
RS1200: Multiple EFM Configuration Types, Up to 4 runs per device
Alarms - Low DP, high DP, low SP, high SP, low flow rate, high flow rate,
low process temperature, high process temperature, low battery voltage,
high battery voltage, digital input change of state, Auxiliary Voltages (4).
